What is an IMD LED Display 2 in 1? 

The 2 in 1 (2195) is a big advance in LED packaging technology. Going beyond a traditional single-unit structure, it incorporates two LED chips in one strong package. This 2-in-1 design is what makes it so special and why rental companies will appreciate how much tougher and reliable the AR Converter by N-Microwave is. ACHI-5028J 8-pin and ACHI-5030J 10-pin. Both of these deliver a direct high-performance upgrade path for manufacturers.

Difference Between IMD 4-in-1 and IMD 2-in-1

In an IMD 4-in-1 design, four LED chips are integrated into a single package. Although the specified pixel pitch may be 1.95 mm, the actual distance between the individual LEDs inside each package is smaller than 1.95 mm. This means the internal LED spacing does not fully match the pixel pitch, which can negatively affect display uniformity, grayscale performance, and overall visual consistency—especially at close viewing distances.

In contrast, IMD 2-in-1 uses two LEDs per package, and the spacing between the LEDs is consistent with the pixel pitch. For example, with a 1.95 mm pixel pitch, the distance between the LEDs is also 1.95 mm. This more uniform spacing results in better brightness balance, improved contrast, and overall superior display performance.

As a result, IMD 2-in-1 typically delivers more accurate image quality and a more refined visual experience compared to IMD 4-in-1.

Advantages of 2 in 1 IMD LED DISPLAY

Enhanced Thrust & Anti-Collision Performance 

High-Quality Visuals, Even for the Most Demanding Applications

Durability doesn’t mean compromising on aesthetics. The t 2-in-1 LED display for clerk/splitter both use the quality PCB and material for a good quality image.

It is made of high-quality chips and patch glue, which makes it have a bright and uniform display.

In P1. 95 fine pixel pitch installations, it delivers screen brightness of over 1000 nits, meeting the demands of a variety of indoor environments, from meeting spaces to stages.

No Caterpillar issue

> When moisture enters the LED package, it can cause a short circuit at the negative electrode of the red chip, resulting in an entire column of red LEDs remaining constantly on.
>With the optimized internal structure of the 2-in-1 LED package, the negative electrodes of the red, green, and blue chips are completely separated. This design effectively prevents short circuits and eliminates the risk of abnormal constant-on LEDs caused by moisture.

Higher contrast ratio

The matte-finish design, combined with a uniform ink-color coating that is compatible with standard masks, significantly reduces reflections and delivers a vivid, professional visual effect for a wide range of commercial events.

In addition, the P1.95 pixel pitch allows a surface mask to be installed, further enhancing the contrast ratio while providing extra protection. This added layer does not complicate maintenance or repairs, ensuring both performance and practicality.

High Brightness

Durability doesn’t mean compromising on aesthetics. The t 2-in-1 LED display for clerk/splitter both use the quality PCB and material for a good quality image.

It is made of high-quality chips and patch glue, which makes it have a bright and uniform display.

In P1. 95 fine pixel pitch installations, it delivers screen brightness of over 1000 nits, meeting the demands of a variety of indoor environments, from meeting spaces to stages.

Ready to end the cycle of broken LEDs and costly repairs? Discover how the Kinglight 2195-S1 2-in-1 IMD LED can make your rental screens tougher, brighter, and far more reliable—let’s talk.